Setting up the Default Gateway Option

If you are still experiencing problems reaching a database via the VPN from an off-site location, you may need to change the default gateway settings on your VPN. Please use the instructions below.

• When you start your VPN (login screen), there should be a properties button at the bottom. Please click that.
• Click on the Networking tab at the top of the screen.
• The Internet Protocol (TCP/IP) line should be highlighted (selected). Please click the Properties tab.
• Please click the Advanced Button.
• Check the  Use default gateway on remote network
  • Click OK
  • Click OK
  • Click Ok
  • Click Ok

Now, when you connect and go to off-campus databases, you should appear to be on-campus.